Step-by-Step DIY Kitchen Sink Installation Guide

Prep Your Kitchen Sink for Installation

Preparation is crucial before undertaking such an invasive task to avoid detrimental and expensive mistakes. The first step is to determine the right kitchen sink size, ensuring your new fixture securely fits the opening. This is crucial to eliminate the need for adjustments and other rigorous processes down the line. With that said, measure the sink’s height, width, and length to ensure you make an informed purchase.

If you prefer under-mount sinks, consult a professional plumbing repair service to ensure you choose the right countertop. This is mainly because only natural stone countertops or solid surfaces can withstand the weight. Depending on your preferred faucet, you may need the expertise of a handyman to handle the installation process. Unlike untrained DIY enthusiasts, plumbing repair service providers understand the different drain pieces and components, ensuring timely replacements and saving you money on complete sink upgrades.

A 5-Step Guide to Remove Your Old Kitchen Sink

If you are a seasoned DIYer, you still need to remove the old sink before installing the new one. Here’s a step-by-step guide to help you prepare your kitchen plumbing for a new faucet.

Shut Off the Water Supply

The first step to a successful sink removal is to shut off the water supply lines for your cold and hot water. Turn on the valves until there’s no water coming out of the faucet when you run the tap. Once you are certain the water supply line is completely shut off, leave the taps open to relieve the pressure.

Disconnect the Water Supply Lines

The next step is to disconnect the water supply lines to your sink using an adjustable wrench. It is advisable to keep a container or bucket on standby to trap the water exiting the pipes. Additionally, disconnect the dishwasher drain line and the disposal. Since disposal units are complex, follow the manufacturer’s instructions to navigate the process safely.

Loosen the Clips and Cut Through the Old Caulk

If your sink uses clips to stay secure, loosen the clips using a wrench or screwdriver. After ensuring the clips are off, cut through the old caulk using a utility knife to loosen the sink all around the counter for easy removal.

Remove the Sink

Once you are certain the old faucet isn't attached to the counter or hard surface, have a friend or family member help you push the bottom part while you lift the top side until it comes out. This is a straightforward process, especially if you follow the steps mentioned. Next, install the new faucet securely in position and reapply the caulk for long-lasting results.

Clean the Area

After a successful sink removal and installation, clean up the worksite to get rid of plumber’s putty, caulk, old mineral deposits, and other debris. This is crucial not only for aesthetics but also safety especially if you have children and pets in the building.

Now that you know the basics of kitchen sink removal and installation, you can smoothly conduct a DIY home improvement without risking your kitchen plumbing. Contact us at Mr. Rooter Plumbing and schedule an appointment with our local plumbers in Dallas, TX to learn more pertinent information about various plumbing tasks you can tackle by yourself.